KP

Print Friendly

Centrifugal Electric Pumps One Impeller 2″

The close-coupled centrifugal electric pumps with one impeller medium flow series KP have been designed to pump clean liquids, without abrasives and suspended solids, non-explosive or aggressive for the pump’s materials

  • Liquid temperature not higher than 35 °C for domestic use (CEI EN 60335-2-41) or 90 °C for other use, while the ambient temperature must not be higher than 40 °C
  • Flow rate up to ~ 36 m3/h
  • Heads up to ~ 30 m

Technical Features

  • Pump body: cast iron G20 with anti-corrosive coating
  • Motor bracket: cast iron G20 with anti-corrosive coating
  • Impeller: stamped brass UNI-EN 12165 (Techno-polymer for KP 80-100-120)
  • Pump shaft: stainless steel Aisi 304 (Aisi 420 F for KP 80-100-120)
  • Mechanical seal: carbon-ceramics

Motor

  • The control motors are asynchronous, squirrel cage-type, closed, with external ventilation
  • Incorporated motor protection and capacitor always on, for single-phase models
  • The motor protection for three-phase models must be installed by the customer. Equipment compliant with current standards should be used
  • Class of insulation:F-service:S1-Degree of protection: IP 44
  • Terminal board protection: IP 54